Double Garage Kit 6x6m

$7,995.00

The 6×6 Double Garage Gable Roof 15-degree roof pitch.

If you are after an economical, heavy-duty, Australian-made garage, you can’t surpass this Stramit-designed and supplied premium garage kit. If the 6×6 is not what you need, it is available in any customised size.  The shown price is a base price – please call or email for a site-specific quote.

Call us on 1300 520 378 for a customised double garage quote.

  • Double garage kits have a 10, 15, or 22-degree  roof pitch. (15 degrees is standard)
  • We can add additional engineering requirements to suit the installation of solar panels on the roof.
  • This size design covers an area of 36m2
  • This is the ultimate solution for a double-car garage or home shed.
  • Delivery time is usually approximately four weeks from the date of order.
  • Free or discounted delivery is available to most NSW, ACT, QLD, VIC, TAS, SA, and WA areas.
  • Base prices are based on a height of 2.4m for wind region A.
  • Engineering plans can be obtained for a 10% deposit.
  • This product cannot be ordered online; a site-specific quote is required for each order.
  • Please complete the quote request form for a formal site-specific quote or call 1300 520 378.
Category:

Description

Here’s what you get…

  • 6m wide x 6m deep. It is measured from outside fascia to outside fascia.
  • 2.4m high measure from the top of the low side to ground level.
  • Height upgrades of 2.7, 3.0m and 3.4m are available.
  • 2 x Roller doors, 2400w x 2100h
  • 15 Degree roof pitch as standard

Equipped with:

  • Australian-made Bluescope steel structural columns, rafters and purlins.
  • Engineering and compliance certificates for all Australian states.
  • Architectural drawings and slab layout design.
  • We have a detailed construction guide to assist with installation.
  • Monoclad Colorbond steel roof sheeting (Any Colorbond Colour)
  • 150mm guttering (Any Colorbond Colour)
  • Downpipes and connections to the gutter (Any Colorbond Colour)
  • Bolt-down footing plates
  • Colour-coded roof screws, deck screws and pop rivets (Any Colorbond Colour)
  • Cut-to-size steel components
  • Pre-drilled holes on bearers and rafters
  • specifically designed brackets for each connection point.
  • Genuine Australian Heavy Duty Steel Garages
  • Free or discounted delivery to most towns and cities Australia-wide.

Additional information

Weight 4000 kg
Dimensions 600 × 600 × 100 cm
Go to Top